XAUUSD ZZ Breakout MACD Filter (no martingale)

Avatar
patrick mast
  • updated

hello together

I would like to present you my CP Gold set.

It is based on a 15 minute zigzag breakout strategy with 2 MACD filters and trailing stop.

Stoploss is set to 15% per 0.1 lot. for 0.2 lots accordingly 30%.

DD should be basically maximum the 30% respectively 60% (2 stoploss in a row). The set has a super recovery after a loss.

Once the ADX indicator is in place, I should bring the DD even further down...

I recommend a minimum of 1000k to start. but probably also works with 100 dollars :P

The Set is backtestes since 01.2017

Inital 4000 (0.1 Lots /1000)

result:

Image 2137

CP_ZZ_MACD_XAUUSD_nomartingale.set


Have fun and give Feedback. :)


MT version:
Set for MT5 only
EA version:
2.43
Symbol:
XAUUSD
TimeFrame:
15
Replies 81
Avatar
3
ferdinand tampubolon

Image 4663

Image 4664

Image 4665



deposit $100

Avatar
1
mel
Quote from Samuel Nguyen

The result quite impressive for XAU! Thanks a lot!

Image 3898

Image 3897

I made the same mistake. Your history quality on the top left is 56%. Make sure to select "Every tick based on real ticks." on your Settings tab. This should improve your history quality.

Avatar
0
Samuel Nguyen

The result quite impressive for XAU! Thanks a lot!

Image 3898

Image 3897

Avatar
0
viktor huggare
Quote from Andrey Khatimlianskyi

Vantage doesn't allow you to set pending orders (including SL and TP) near the price. This can affect results, check it carefully.

Oh, thank you so much! 

Avatar
0
Andrey Khatimlianskyi
Quote from viktor huggare

Hello
I've looked through all the comments but might have missed it.. But does anyone get the message:

Sell-stop OP corrected due to stoplevel (20.0p): 1821:25 -> 1814.44... ?
I run the test on Vantage FX. I have tested some different settings for pending order, but cannot figure out the issue =(

Vantage doesn't allow you to set pending orders (including SL and TP) near the price. This can affect results, check it carefully.

Avatar
0
viktor huggare

Hello
I've looked through all the comments but might have missed it.. But does anyone get the message:

Sell-stop OP corrected due to stoplevel (20.0p): 1821:25 -> 1814.44... ?
I run the test on Vantage FX. I have tested some different settings for pending order, but cannot figure out the issue =(

Avatar
0
Stephane DURIF
Quote from ade f

Alright so, that we must find another friendly broker to XAU or give up this set? 

Hello, for me VantageFx is very correct for XAUUSD

Avatar
0
hein watson
Quote from joel

The profit margin in your setup is too short. 

So I used [Use closed bars only] to extend the profit period a bit.


However, the profit is still too small.


Is there a way to get as much profit as the red box as shown in the picture above?
Please give me some advice.

Hi Joel. Have you figured out a way to gain the profits in the red boxes?

I think the trailing stop size, the trailing step and the trailing stop start needs to be adjusted for us to achieve those gains I am just not sure of the exact parameter.

Perhaps we should try a few combinations and see what we get.

Avatar
0
Khunpol Chumpol
Quote from Sai Pratap

u have to use data from brokers with MT5.

Thx for replied me sir

Avatar
0
Sai Pratap
Quote from Khunpol Chumpol

I don't have data for this backtest, What source do you guys use the real tick from?

u have to use data from brokers with MT5.